铜雕,铜雕厂,铸铜雕塑厂,铜雕厂家

铜雕工艺品必须放在干燥的环境里来保护，保持干燥，没有尘埃和空气污染物；温度在18℃-24℃，相对湿度在40%-50%。2、必须预防接触铜雕工艺品产生的有害化学作用物质，如酸类、油脂、氯化物等。人物雕塑最应该注意了。3、对于铜雕工艺品上的尘埃，先用冷风电吹风吹一下，然后用麦杆刷清洁，最后用软毛刷收尾,千万不要用金属抛光剂、水、其他任何溶剂，对于缝隙，我们可以用口水把棉花球弄湿再擦，沿着裂缝从头擦到尾，以免遗漏。4、铜雕工艺品摆放时间过长之后，依据摆放的环境或多或少会出现一些暗哑的现象，这个时候可以用棉丝质的细布轻轻来回擦拭，可达到抛光的效果，从而让表面的保护蜡层重新焕发光彩。尤其是现代雕塑的维护，更应该是这样的。

The copper carving arts and crafts must be protected in a dry environment, kept dry, free of dust and air pollutants; the temperature is 18 ℃ - 24 ℃, and the relative humidity is 40% - 50%. 2. It is necessary to prevent contact with harmful chemicals produced by copper carving crafts, such as acids, grease, chlorides, etc. Figure sculpture should be paid more attention to. 3. For the dust on the copper carving crafts, first blow it with a cold air blower, then clean it with a straw brush, and finally close it with a soft brush. Never use metal polishing agent, water or any other solvent. For the cracks, we can wet the cotton ball with saliva and then wipe it, and wipe it from head to tail along the cracks to avoid omission. 4. After a long time of placement, there will be some dull phenomenon more or less according to the placement environment. At this time, you can use a cotton silk fine cloth to gently wipe back and forth to achieve the polishing effect, so as to make the surface protection wax layer glow again. In particular, the maintenance of modern sculpture should be more like this.

河北汇丰铜雕工艺品厂是一家专业的雕塑工艺品厂，制作的铜雕工艺品艺术优美、形态生动逼真，不管是前期的的图样设计还是后期的制作完善，都体现出了他们的专业与用心。

Hebei HSBC copper carving handicraft factory is a professional sculpture handicraft factory. The copper carving crafts produced are beautiful in art and vivid in form. Whether the pattern design in the early stage or the production in the later stage is perfect, they all show their professional and intention.