欢迎访问唐县汇丰工艺品厂官方网站!

百度地图 | 谷歌地图 | 关于我们

铜雕,铜雕厂,铸铜雕塑厂,铜雕厂家

全国咨询热线:

13930252698

当前位置:首页 > 新闻咨询 > 正文

铜雕专业保养方法

作者: 来源: 日期:2020-1-3 7:10:08 人气:0

苯骈三氮唑法:苯骈三氮唑与铜及其盐类能形成稳定络合物,在铜合金表面生成不溶性且相当牢固的透明保护膜防止水蒸气和空气污染物的侵蚀,苯骈三氮唑易受热升华,失去保护作用,所以最后应在铜雕表面涂一层高分子材料,做封护膜;

Benzotriazole method: benzotriazole can form a stable complex with copper and its salts, and form an insoluble and quite solid transparent protective film on the surface of copper alloy to prevent the erosion of water vapor and air pollutants. Benzotriazole is easy to sublimate and lose its protective effect. Therefore, a layer of high molecular material should be coated on the surface of copper sculpture to make a protective film;

b,,b.jpg

氧化银法:将氧化银与酒精调成糊剂,涂在铜雕工艺品表面,并置于潮湿环境中,使其充分作用,形成氧化亚铜和氯化铜,覆盖氯化亚铜表面,封闭铜雕工艺品的暴露面,达到控制腐蚀铜雕的目的适于斑点状局部腐蚀的器物及有金属镶嵌物的

Silver oxide method: paste silver oxide and alcohol on the surface of copper carving crafts, and put it in a humid environment to make it fully function, form cuprous oxide and cupric chloride, cover the surface of cuprous chloride, close the exposed surface of copper carving crafts, and achieve the purpose of controlling corrosion of copper carving, which is suitable for spotty local corrosion of artifacts and metal inlays

5z.jpg

碱液浸泡法:将被腐蚀的铜雕置于倍半碳酸钠溶液中浸泡,使铜的氯化物逐渐转换为稳定的铜的碳酸盐,铜雕的氯离子被置换出来转入浸液中,随后将器物用蒸馏水反复清洗,除去碱液,干燥后封护;

Alkali immersion method: put the corroded copper sculpture in the solution of sodium bicarbonate, so that the chloride of copper is gradually converted into stable carbonate of copper, and the chloride ion of copper sculpture is replaced and transferred into the immersion solution, and then the utensil is repeatedly cleaned with distilled water to remove the alkali solution, dried and sealed;

mds.jpg

除了以上专业的方法,如果我们没有这个铜雕养护条件,我们可以采用以下这些简单的处理方法对我们的铜雕艺术品进行保养:

In addition to the above professional methods, if we don't have this copper sculpture maintenance conditions, we can use the following simple processing methods to maintain our copper sculpture works:

m5.jpg

唐县汇丰铜雕厂以大中型雕塑作品为主打产品,兼做小型工艺品。各种红、黄、青铜工艺品铸造和大型雕塑,产品规格及品种齐全,雕塑技术先进,工艺精湛。

Tang County HSBC copper carving factory takes large and medium-sized sculpture works as its main products, and also makes small handicrafts. All kinds of red, yellow and bronze handicraft casting and large-scale sculptures, complete product specifications and varieties, advanced sculpture technology, exquisite workmanship.


推荐产品
联系我们

唐县汇丰工艺品厂

热线:13930252698

地址: 保定市唐县田家庄工业区